The Focal Chorus 705 bookshelf speakers, finished in black lacquer, pair with elegant stands to deliver crisp, detailed sound. Though many comparable models are cheaper, the Chorus 705’s refined design and balanced performance justify its premium price, making it a strong entry‑level choicefor audiophiles
Key Specifications and Performance Metrics
Focal Chorus 705 delivers 55‑30kHz response, 100W RMS, 88dB sensitivity, 2.5‑inch woofer, 0.5‑inch tweeter. Compact 34×34×20cm size, black lacquer finish, stands included. Balanced imaging, low distortion, ideal for living‑room or studio use. Enjoy.OK
Frequency Response and Power Handling
Focal’s Chorus 705 bookshelf speakers are engineered to deliver a wide, natural soundstage that spans from deep, resonant lows to crystal‑clear highs. The system’s frequency response is specified at 55 Hz to 30 kHz, a range that comfortably covers the full audible spectrum while providing ample headroom for dynamic peaks. This breadth ensures that even complex, layered recordings retain their nuance without distortion or muddiness. The 2.5‑inch mid‑range driver, coupled with a 0.5‑inch tweeter, works in harmony to reproduce mid‑range frequencies with tight, accurate detail, while the larger woofer handles bass excursions with low distortion and a smooth, controlled roll‑off. The speakers’ power handling capability is rated at 100 W RMS, allowing them to comfortably drive a wide range of amplifiers without clipping. Their 88 dB sensitivity rating means that even modest power inputs will produce a lively, engaging sound, making the Chorus 705 suitable for both casual listening and critical listening sessions. The design incorporates a dual‑stage crossover network that minimizes phase shift and preserves the integrity of the signal path, ensuring that the transition between drivers is seamless. Additionally, the use of high‑quality materials such as a rigid, lightweight aluminum enclosure and a carefully engineered damping layer reduces resonances and internal reflections, contributing to a cleaner, more accurate sound. These translate into a speaker handles dynamic demands from vinyl to streams, maintaining clarity across positions.
Physical Features and Aesthetic Design
The Chorus 705 features a sleek black lacquer finish, compact size, and a lightweight aluminum chassis. Its minimalist front panel and subtle grille blend seamlessly into modern décor, delivering clear, refined audio performance. Ideal for home theaters!
Finish Options and Dimensions
The Focal Chorus 705 bookshelf speakers are available exclusively in a sophisticated black lacquer finish that offers a glossy‑matte hybrid surface, providing a modern aesthetic that complements contemporary interior design. The lacquer is applied over a high‑density foam core and a lightweight aluminum chassis, giving the speaker a robust feel while keeping the overall weight under 12 kg. The dimensions are carefully engineered to fit standard bookshelf spaces: the height is 12.5 inches (31.75 cm), the width is 8.5 inches (21.59 cm) and the depth is 4.5 inches (11.43 cm). These measurements allow the speakers to be positioned either on a shelf or on a stand without compromising room acoustics. The speakers also feature a detachable grille that can be removed for a cleaner look or left in place for added protection. The black lacquer finish is resistant to scratches and fingerprints, and it can be cleaned with a soft, dry cloth. Overall, the combination of a sleek finish, compact size, and lightweight construction makes the Chorus 705 a versatile choice for both living rooms and dedicated listening rooms.
The speaker’s internal architecture includes a 1.4‑inch mid‑range driver and a 2‑inch tweeter, both sealed in a custom enclosure that optimizes resonance control. The enclosure’s internal volume is 0.35 ft³ (9.8 L), providing a tight bass response while maintaining clarity across the spectrum. The black lacquer finish is applied in two coats, each cured at 60 °C for 30 minutes to ensure durability. The final product is rated at 80 dB SPL at 1 m with a nominal impedance of 8 Ω. The speakers are designed to fit standard 18‑inch stands, with a mounting bracket that allows for a 90‑degree tilt to reduce standing waves. The overall footprint is 10.5 inches wide, 12.5 inches tall, and 4.5 inches deep, making them ideal for tight spaces. The weight of each speaker is 11.3 kg (24.9 lb), which balances portability with stability. The black lacquer finish is also available in a matte black variant for those who prefer a more subdued look. In addition, the speakers come with a 1‑year warranty covering manufacturing defects and a 5‑year limited warranty for the lacquer finish against peeling or chipping. Customers can also request custom engraving on the rear panel for a personalized touch. All measurements are given in inches and centimeters for convenience.
Setup and Placement Guidelines
Place the Chorus 705 on a stable shelf or stand, 1 ft from walls to avoid reflections. Position speakers at ear level, 3 ft apart, angled 15° toward the listening area. Use a 30 W amplifier, connect via balanced XLR for optimal clarity. Keep speakers 3 ft from walls !
Optimal Room Placement
For the Chorus 705, start by selecting a location that balances acoustics and convenience. Place each speaker on a stable shelf or stand, 1 ft (30 cm) from the nearest wall to reduce early reflections. The speakers should be 3 ft (1 m) apart, forming a triangle with the listening position. Angle the drivers 15° toward the listener to create a coherent sound field. Avoid placing the pair directly on a carpeted floor; a wooden or hardwood surface provides better bass response. If the room has high ceilings, consider mounting the speakers at ear height (approximately 3 ft) to prevent sound energy from bouncing off the ceiling. Use acoustic panels or curtains on the rear wall to dampen reflections and improve imaging. Keep the speakers at least 2 ft from any large furniture or objects that could obstruct the sound path. When setting up, test the placement by playing a range of music and adjusting the angle until the sound feels balanced and natural. These guidelines help the Chorus 705 deliver its full tonal range and clarity in most living‑room environments. Enjoy clarity, depth.now
Position the speakers slightly ahead of the listening point to create a shallow stereo field that preserves depth without phase issues. In rooms with reflective surfaces, add diffusers to scatter sound and reduce flutter echoes. If the room is large, consider adding a second pair but keep the same 3 ft spacing relative to the primary pair. Finally, perform a quick sound check after any adjustment to confirm balance. It guarantees a natural listening feelso.
Connecting to Amplifiers and Receivers
To integrate the Chorus 705 into your audio chain, begin by selecting a power‑matched amplifier or receiver that can deliver at least 50 W per channel into 8 Ω, the speaker’s recommended impedance. Use high‑quality speaker wire—18 AWG or thicker—to minimize resistance over typical distances. Connect the positive terminal of the amplifier to the red speaker wire, and the negative to the black. Ensure the speaker’s polarity matches the amplifier’s; reversing polarity will cause phase cancellation. Position the speakers on stands or shelves so that the front of the drivers faces the listening area, and keep the back of the speaker away from walls to avoid standing waves. If your receiver has a built‑in crossover, set the high‑pass filter to 80 Hz to match the Chorus 705’s low‑frequency limit. For optimal performance, use a dedicated subwoofer or add a passive crossover if you wish to extend bass response. After wiring, perform a quick test with a balanced track to verify that the left and right channels are correctly aligned and that the volume level is appropriate; Adjust the amplifier’s gain to avoid clipping while maintaining a headroom of at least 6 dB. Finally, use a calibrated speaker level meter or a simple listening test to confirm that the speakers are balanced and that the soundstage feels natural. Use a calibrated SPL meter to fine‑tune levels for theexperience.
Installation Process and Assembly Steps
Unbox the Chorus 705, inspect for damage, and mount the speaker on its stand. Secure the bracket with supplied screws, then connect speaker wires to the amplifier, ensuring correct polarity. Position at ear level, adjust height, and test with a balanced track in room.?!
Unboxing and Initial Inspection
Upon receiving the Focal Chorus 705 bookshelf speakers, begin by carefully removing the protective packaging. The outer box is sturdy, with a clear window that showcases the sleek black lacquer finish of the speakers. Inside, the speakers are nestled in foam inserts that cradle each unit, preventing any movement during transit. First, inspect the outer surface for scratches or dents; the lacquer should be flawless, and any blemish could indicate mishandling. Next, examine the speaker cabinets for dents or misalignments, paying close attention to the front grille and the speaker drivers. The drivers should sit flush against the cabinet, and the grille should be free of cracks. Verify that the included stands are intact, with no bent legs or missing screws. The stands are designed to elevate the speakers to optimal listening height, and their stability is crucial for accurate sound reproduction. Finally, check the packaging for any signs of moisture or compression damage, such as warped foam or displaced components. A thorough initial inspection ensures that the speakers are in pristine condition before proceeding to assembly and placement. During this inspection, also verify that the speaker cables are free of kinks, that the speaker terminals are clean and securely seated, and that the included mounting brackets are present and undamaged; these small details can significantly affect the long‑term reliability and sound quality of the Chorus 705 system for optimal performance. and longevity.!!!
Common Issues and Troubleshooting Tips
When using the Focal Chorus 705 bookshelf speakers, a few recurring problems can arise. The most frequent is a loss of high‑frequency detail, often caused by a loose speaker‑wire connection or a damaged speaker terminal. To resolve this, first disconnect the speaker cable, inspect the connector for corrosion or bent pins, and re‑solder or replace the cable if necessary. Another issue is a noticeable mid‑range dip, which may indicate a mis‑aligned driver or a faulty crossover component. Check that the drivers are seated correctly in the cabinet and that the internal crossover is free of debris. If the problem persists, consult the service manual for a possible replacement of the crossover network.
Some users report a humming or buzz that appears when the system is powered on. This is typically a grounding problem. Ensure that the amplifier or receiver is properly grounded and that the speaker cables are routed away from power cords. Tightening the speaker‑terminal screws can also eliminate stray vibrations. In rare cases, a damaged speaker cone can produce a rattling sound; inspect the cone for cracks or tears and replace the speaker if needed!!!
Finally, if the speakers exhibit a sudden drop in volume or a complete loss of sound, the issue may be a defective amplifier output or a shorted speaker wire. Test the speakers with a known good amplifier to isolate the fault. If the problem is confirmed with the Chorus 705, contact Focal support for a warranty claim or professional repair. Regularly cleaning the speaker grille with a soft brush and storing the speakers in a dry environment will help prevent many of these issues and preserve the system’s performance over time. If issues persist, contact Focal support or visit the official service center!!
Maintenance and Care Recommendations
Regular upkeep of the Focal Chorus 705 ensures longevity and preserves sonic clarity. Begin by dusting the speaker grille with a soft, lint‑free cloth; avoid abrasive materials that could scratch the lacquer finish. For deeper cleaning, lightly dampen a cloth with water or a mild soap solution, then wipe the grille and cabinet, allowing the surface to dry completely before re‑installing the speaker. Never apply harsh chemicals or solvents, as they can damage the lacquer and internal components.
Inspect the speaker terminals and cable connections monthly. Tighten any loose screws and replace frayed or damaged speaker wires promptly. Store the speakers in a climate‑controlled environment; extreme humidity or temperature fluctuations can warp the cabinet or degrade the driver materials. When not in use, cover the speakers with a breathable fabric to protect against dust while preventing moisture buildup. If you notice any distortion, click, or crackle during playback, check the speaker cone for visible damage and consult Focal support for potential repair or replacement. Following these simple steps will keep the Chorus 705 performing at its best for years to come.
Use a power conditioner to filter electrical noise and protect the drivers from voltage spikes. Place the speakers on a padded stand to reduce vibration. Periodically inspect the enclosure for moisture or dust, and clean the grille with a soft brush to keep acoustic performance optimal. This routine keeps the speakers clean!
Warranty and Support Information
The Focal Chorus 705 has a 5‑year limited warranty protecting against defects andyou The warranty is valid only for the original purchaser and requires proof of purchase. It does not cover damage caused by misuse, accidental impact, or environmental factors such as moisture, extreme temperature, or power surges. For repairs, send the unit to an authorized Focal service center or contact the local distributor. Focal offers a 30‑day return policy for new units that are unopened and in original packaging. For extended support, customers can register their product online at the Focal website, where they can access firmware updates, user manuals, and troubleshooting guides. Technical assistance is available via email or phone during business hours. In case of a defect, the service center will repair or replace the unit at no additional cost, provided the warranty conditions are met. All repairs are performed by certified technicians and use genuine Focal parts. The warranty does not cover cosmetic damage such as scratches or dents. For more information, consult the warranty booklet included with the product or visit the Focal support portal. Claims within 30 days and. Warranty claims can be submitted online or by contacting the service center. and purchase. For international customers, Focal offers a line and email listed on the website for Shipping damage is covered if reported within 48 hours. Customers may also request a replacement unit if the defect persists after repair, shipping free to